Jeep Wrangler Fender USMC Globe & Anchor Fender set of 2

Stickers are not individually cut out and are not spaced correctly so you can not just "lay on" the Jeep insignia. Once cut out, I was impressed at how easy it was to apply each letter. As well as the quality of the material. The adhesion will be tested.. ;)
This is how I did it, if it helps...
1- cut out individual letters
2-clean surface, I used rubbing alcohol. (test first)
3- remove stiff backing from letter carefully.
4- center letter on desired location and apply even pressure until the entire letter is attached.
5- use a piece of clean cloth rub the letter applying even pressure to ensure adhesion. (watch the film paper, when you can see a thin white line around the sticker it should be attached.
6- carefully remove film. If any of the sticker lifts up, lay the film back down and re-apply pressure to that area.
repeat steps 3-6 for each letter.
CvB