DO I NEED A CURVE OR NOT?  Good Question!
If you order a decal under 30″ curve is not advised

 

If the space you want to install the decal on your windshield is flat like below DO NOT CLICK THE CURVE CHECKBOX 

If the space you want to install the decal on your windshield  has a curve like below then CHECK THE BOX for the curve
Please note if you add the curve, it will reduce the height of each individual letter but the overall height and width will be as ordered. 

If your windshield is curved on the ends and FLAT on the space you want to install it DO NOT CLICK THE CURVE CHECKBOX 

All windshields are a little different, when we add a curve we add a -12 Degree curve that will fit most windshields,  this is not always a perfect fit depending on the make and model. 

Please be careful measuring and deciding if you need a curve or not.  We can not offer free replacement if the wrong item is purchased.

 

Please use the following guide to measure your windshield so the correct size is ordered.

Step 1.  Measure 5 inches down from the top on either side and make a mark with a piece of tape or a dry erase marker.

Step 2.  Measure across the windshield from mark to mark.   This is your overall length.

Step 3.  Deduct 6 inches from the total from step 2.

The total from Step 3 is the Width of the space you have to install your decal.   You can now order any size decal up to this total width.

The height is measured at the end NOT THE CENTER, from your line mark down to the height you want.